Hp ProLiant BL685c G7 Server-Blade Manual de usuario Pagina 11
- Pagina / 103
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Component identification 11
Item Connector Card support
Mezzanine connector 2 PCIe x8 Type I or II mezzanine card
Mezzanine connector 3 PCIe x8 Type I or II mezzanine card
System maintenance switch
Position Function Default
1* iLO 3 security override Off
2 Configuration lock Off
3 Reserved Off
4 Reserved Off
5* Password disabled Off
6* Reset configuration Off
7 Reserved Off
8 Reserved Off
9 Reserved Off
10 Reserved Off
*To access redundant ROM, set S1, S5, and S6 to ON.
System maintenance switch procedures
When you perform troubleshooting steps, this guide may instruct you to perform the following procedures:
• Clear the system configuration ("Clearing the system configuration" on page 11).
• Access the redundant ROM ("Accessing the redundant ROM" on page 12).
To complete these procedures, you must change physical settings on the system maintenance switch.
Clearing the system configuration
RBSU can be used to restore the factory default configuration. For more information, see "HP ROM-Based
Setup Utility (on page 56)." If the system is unable to boot into RBSU, use the following steps to clear the
system configuration:
1. Power down the server blade (on page 14).
2. Remove the server blade (on page 15).
3. Remove the access panel (on page 16).
4. Change position 6 of the system maintenance switch to on.
5. Install the access panel (on page 16).
6. Install the server blade in the enclosure and power up the server blade.
7. Wait for the POST message that prompts you to change the switch setting:
Maintenance switch detected in the "On" position.
Power off the server and turn switch to the "Off" position.
8. Repeat steps 1 through 3.
- User Guide 1
- Intended audience 2
- Contents 3
- Component identification 6
- SAS and SATA hard drive LEDs 7
- System board components 9
- DIMM slot identification 10
- System maintenance switch 11
- HP c-Class Blade SUV Cable 12
- Item Connector Description 13
- Operations 14
- Remove the server blade 15
- Remove the access panel 16
- Install the access panel 16
- Remove the DIMM baffles 17
- Install the DIMM baffles 17
- Overview 19
- Remove the device bay blank 20
- Setup 21 21
- Setup 24 24
- Connecting to the network 25
- Installing a server blade 26
- Completing the configuration 27
- Introduction 28
- Memory option 28
- DIMM identification 29
- DIMM installation guidelines 30
- DIMM population order 30
- Installing DIMMs 31
- 2. Prepare the hard drive 32
- Mezzanine card option 33
- Processor option 35
- Cabling 45
- USB devices 46
- Item Description 48
- Network-based PXE deployment 50
- Deployment methods 52
- CD-ROM deployment 53
- Diskette image deployment 54
- Configuration tools 55
- HP ROM-Based Setup Utility 56
- Boot options 57
- BIOS Serial Console 57
- Configuring AMP modes 57
- Array Configuration Utility 58
- Management tools 59
- HP Systems Insight Manager 60
- Erase Utility 61
- Redundant ROM support 61
- Internal USB functionality 62
- External USB functionality 62
- Integrated Management Log 63
- Keeping the system current 64
- ProLiant Support Packs 65
- Firmware 65
- HP Smart Update Manager 65
- Care Pack 66
- Troubleshooting 67
- Symbols on equipment 68
- Warnings 68
- Symptom information 69
- Service notifications 70
- Loose connections 70
- Troubleshooting flowcharts 70
- Start diagnosis flowchart 71
- General diagnosis flowchart 72
- Symptoms: 73
- POST problems flowchart 75
- OS boot problems flowchart 77
- • Corrupted OS 78
- • Redundancy failure 80
- Troubleshooting 81 81
- Battery replacement 82
- FCC rating label 83
- Class A equipment 83
- Class B equipment 83
- Modifications 84
- • EMC Directive 2004/108/EC 85
- Japanese notice 86
- BSMI notice 86
- Korean notice 87
- Chinese notice 87
- Laser compliance 87
- Battery replacement notice 87
- (Geräuschemission) 88
- Electrostatic discharge 89
- Specifications 90
- Technical support 91
- Technical support 92 92
- Customer Self Repair 93
- Technical support 94 94
- Reparo feito pelo cliente 95
- Technical support 96 96
- Technical support 97 97
- Technical support 98 98
- Acronyms and abbreviations 99
- Index 101 101
- Index 102 102
- Index 103 103
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant BL685c G7 Server-Blade
(98 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.128 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales