Hp ProLiant BL685c G7 Server-Blade Manual de usuario descargar pdf (Pagina 12)

Component identification 12

Change position 6 of the system maintenance switch to off.

10. Repeat steps 5 and 6.

IMPORTANT: When the server blade boots after NVRAM is cleared, a delay of up to 2

minutes is normal. During this delay, the system appears non-functional. Do not attempt any

procedures during the delay.

Accessing the redundant ROM

If the system ROM is corrupted, the system automatically switches to the redundant ROM in most cases. If

the system does not automatically switch to the redundant ROM, perform the following steps:

1. Power down the server blade (on page 14).

2. Remove the server blade (on page 15).

3. Remove the access panel (on page 16).

4. Change positions 1, 5, and 6 of the system maintenance switch to on.

5. Install the access panel.

6. Install the server blade in the enclosure and power up the server blade.

7. After the system beeps, repeat steps 1 through 3.

8. Change positions 1, 5, and 6 of system maintenance switch to off.

9. Repeat steps 5 and 6.

If both the current and backup versions of the ROM are corrupt, return the system board for a service

replacement.

To switch to the backup ROM when the System ROM is not corrupt, use RBSU.

HP c-Class Blade SUV Cable

Item Connector Description

1 Server blade

For connecting to the SUV connector on the

server blade front panel

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 102 103

Sin comentarios

Hp ProLiant BL685c G7 Server-Blade Manual de usuario Pagina 12