
Operations 31
6.
Extend the processor memory drawer approximately 2.54-5.1 cm (1-2 inches).
7. Loosen the thumbscrews on the SPI board, and then lift the SPI board to access the cables.
8. Disconnect all cables from the SPI board.
IMPORTANT: If replacing the SPI board or clearing NVRAM, you must re-enter the server serial
number through the Advanced System ROM options in UEFI System Utilities ("Re-entering the
server serial number and product ID" on page 80).
9. Remove the SPI board from the server.
Comentarios a estos manuales