Hp ProLiant ML110 G7 Server Manual de usuario descargar pdf (Pagina 50)

Hardware options installation 50

Install the expansion board.

10. Connect any required internal or external cables to the expansion board. See the documentation that

ships with the expansion board.

11. If installing a full-length expansion board, install back the board retainer.

12. Install the air baffle (on page 22).

13. Install the access panel (on page 21).

14. Lock the tower bezel.

15. Connect each power cord to the server.

16. Connect each power cord to the power source.

17. Power up the server (on page 19).

Dedicated iLO management port option

NOTE: Depending on model purchased, the server may look slightly different than shown.

To install the component:

1. Power down the server (on page 19).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Unlock the tower bezel ("Unlock and open the tower bezel" on page 20).

4. Remove the access panel (on page 21).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 112 113

Sin comentarios

Hp ProLiant ML110 G7 Server Manual de usuario Pagina 50