Hp ProLiant ML110 G7 Server Manual de usuario Pagina 81
- Pagina / 113
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Troubleshooting 81
Service notifications
To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport). Select
the appropriate server model, and then click the Troubleshoot a Problem link on the product page.
Server health LEDs
Some servers have an internal health LED and an external health LED, while other servers have a single
system health LED. The system health LED provides the same functionality as the two separate internal and
external health LEDs. Depending on the model, the internal health LED and external health LED may either
appear solid or they may flash. Both conditions represent the same symptom.
For the location of server LEDs and information on their statuses, see the server documentation on the HP
website (http://www.hp.com/support).
Troubleshooting flowcharts
To effectively troubleshoot a problem, HP recommends that you start with the first flowchart in this section,
"Start diagnosis flowchart (on page 81)," and follow the appropriate diagnostic path. If the other flowcharts
do not provide a troubleshooting solution, follow the diagnostic steps in "General diagnosis flowchart (on
page 82)." The General diagnosis flowchart is a generic troubleshooting process to be used when the
problem is not server-specific or is not easily categorized into the other flowcharts.
The available flowcharts include:
• Start diagnosis flowchart (on page 81)
• General diagnosis flowchart (on page 82)
• Server power-on problems flowchart (on page 84)
• POST problems flowchart (on page 87)
• OS boot problems flowchart (on page 89)
• Server fault indications flowchart (on page 90)
Start diagnosis flowchart
Use the following flowchart to start the diagnostic process.
Item See
1
"General diagnosis flowchart (on page 82)"
2
"Power-on problems flowchart ("Server power-on problems flowchart" on
page 84)"
3
"POST problems flowchart (on page 87)"
4
"OS boot problems flowchart (on page 89)"
5
"Server fault indications flowchart (on page 90)"
- HP ProLiant ML110 G7 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Rear panel components 8
- Rear panel LEDs and buttons 9
- System board components 10
- DIMM slot locations 11
- System maintenance switch 11
- System board LEDs 12
- NMI functionality 12
- SAS and SATA drive numbering 13
- SAS and SATA drive LEDs 14
- BBWC module LEDs 15
- FBWC module LEDs 17
- Fan locations 18
- Operations 19
- Remove the tower bezel 20
- Install the tower bezel 20
- Remove the access panel 21
- Install the access panel 21
- Remove the air baffle 22
- Install the air baffle 22
- Optimum environment 24
- Temperature requirements 25
- Power requirements 25
- Installing hardware options 26
- Setting up a tower server 26
- Setup 28 28
- Registering the server 29
- Introduction 30
- HP product QuickSpecs 30
- SAS and SATA drive options 30
- Drive cage options 32
- Drive LED cable option 37
- Storage controller option 38
- Optical drive option 42
- Memory options 45
- Memory configuration 46
- Installing a DIMM 47
- Expansion board options 48
- RPS enablement option 55
- 9. Install the RPS cage 57
- Cabling 60
- Hot-plug, SATA drive support 61
- Hot-plug, SAS drive support 61
- Eight-bay SFF drive cabling 62
- Optical drive cabling 63
- Power supply cabling 64
- Item Description 65
- Configuration and utilities 66
- Using RBSU 67
- Auto-configuration process 67
- Array Configuration Utility 68
- • Selecting the boot volume 69
- Management tools 70
- Diagnostic tools 71
- Integrated Management Log 72
- Keeping the system current 73
- ProLiant Support Packs 74
- Firmware 74
- HP Smart Update Manager 74
- Care Pack 75
- Troubleshooting 76
- Symbols on equipment 77
- Warnings and cautions 77
- Symptom information 78
- Loose connections 80
- Service notifications 81
- Server health LEDs 81
- Troubleshooting flowcharts 81
- General diagnosis flowchart 82
- Symptoms: 84
- Troubleshooting 86 86
- POST problems flowchart 87
- OS boot problems flowchart 89
- Troubleshooting 90 90
- • Redundancy failure 91
- (http://www.hp.com/support) 92
- Troubleshooting 93 93
- Battery replacement 94
- Regulatory information 95
- Electrostatic discharge 96
- Specifications 97
- • ATX 350W Power Supply 98
- Support and other resources 99
- Customer Self Repair 101
- Reparo feito pelo cliente 103
- Acronyms and abbreviations 107
- Documentation feedback 110
- Index 111 111
- Index 112 112
- Index 113 113
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant ML110 G7 Server
(115 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales