Hp ProLiant ML310 G5 Server Manual de usuario descargar pdf (Pagina 42)

Hardware options installation 42

Install the PCI fan.

7. Install the system air baffle and PCI card guide.

8. Connect the PCI fan cable to the PCI fan connector on the system board ("System board

components" on page 11).

9. Install the PCI-X expansion board in slot 1, as needed ("Installing expansion boards" on page 40).

10. Install the access panel (on page 19).

11. Lock the bezel.

12. Power up the server (on page 17).

SAS controller

To install the component:

1. Power down the server (on page 17).

2. Unlock the bezel (on page 18).

3. Remove the access panel (on page 19).

4. Remove the expansion slot cover ("Removing the expansion slot cover" on page 39).

5. Install the SAS controller ("Installing expansion boards" on page 40).

6. Disconnect the SATA cable from the hard drive backplane and the system board.

7. Connect the SAS cable to the hard drive backplane and to the SAS controller ("SAS hard drive

cabling" on page 45).

8. Install the access panel (on page 19).

9. Lock the bezel.

10. Power up the server (on page 17).

Parallel and second serial connector

To install the component:

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 98 99

Sin comentarios

Hp ProLiant ML310 G5 Server Manual de usuario Pagina 42