Hp ProLiant ML310 G5 Server Manual de usuario Pagina 49
- Pagina / 99
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Software and configuration utilities 49
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
• Suggests the optimum configuration for an unconfigured system
• Provides different operating modes, enabling faster configuration or greater control over the
configuration options
• Remains available any time that the server is on
• Displays on-screen tips for individual steps of a configuration procedure
For optimum performance, the minimum display settings are 800 × 600 resolution and 256 colors.
Servers running Microsoft® operating systems require Internet Explorer 5.5 (with Service Pack 1) or later.
For Linux servers, refer to the README.TXT file for additional browser and support information.
For more information, refer to the Configuring Arrays on HP Smart Array Controllers Reference Guide on
the Documentation CD or the HP website (http://www.hp.com
).
Embedded SATA RAID
HP provides the SATA RAID feature through use of the Adaptec Storage Manager. This feature enables
RAID functionality (RAID 0, RAID 1, or RAID 10) for the embedded SATA controller in the system.
Required hardware
Installing the SATA RAID driver may require a diskette drive and CD-ROM drive. Some servers do not ship
with these drives as standard hardware.
NOTE: Systems with Microsoft® Windows Server™ 2003 and HP embedded drivers do not
require additional hardware.
Diskette and CD-ROM drive options
To acquire a diskette drive option or CD-ROM drive option for a server, contact an HP authorized reseller.
For the name of the nearest HP authorized reseller:
• In the United States, call 1-800-345-1518.
• In Canada, call 1-800-263-5868.
• In other locations, refer to the HP website (http://www.hp.com).
USB diskette and CD-ROM drives
For driver installation purposes, a USB diskette drive and USB CD-ROM drive are sufficient.
NOTE: To use a USB drive key in place of the diskette drive, see "Using a USB drive key as a
virtual driver diskette (on page 55)."
HP provides both standard USB support and legacy USB support. Standard support is provided by the OS
through the appropriate USB device drivers. Before the OS loads, HP provides support for USB devices
through legacy USB support, which is enabled by default in the system ROM. HP hardware supports USB
version 1.1 or 2.0, depending on the version of the hardware.
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- SAS and SATA device numbers 8
- Rear panel components 9
- Rear panel LEDs 10
- System board components 11
- System maintenance switch 12
- System board LEDs 13
- Fan locations 16
- Operations 17
- Unlock the bezel 18
- Remove the bezel 18
- Remove the access panel 19
- Install the access panel 19
- Remove a media bay blank 20
- Remove a bezel blank 20
- Rack planning resources 22
- Optimum environment 23
- Power requirements 24
- Warnings and cautions 25
- Installing hardware options 26
- Setting up a server 26
- Registering the server 28
- Introduction 29
- Hard drives 30
- SATA optical drive 32
- USB tape drive 33
- Full-height tape drive 35
- Diskette drives 37
- Expansion boards 39
- Installing expansion boards 40
- PCI-X extender board 41
- SAS controller 42
- Cabling 44
- SATA hard drive cabling 45
- SAS hard drive cabling 45
- Configuration tools 46
- HP ROM-Based Setup Utility 47
- Array Configuration Utility 48
- Embedded SATA RAID 49
- Management tools 52
- Erase Utility 53
- Management Agents 53
- HP Systems Insight Manager 53
- USB support 54
- Diagnostic tools 55
- Integrated Management Log 56
- ROMPaq disaster recovery 56
- Keeping the system current 57
- Care Pack 58
- Battery replacement 59
- Troubleshooting 60
- Symbols on equipment 61
- Symptom information 62
- Loose connections 63
- Service notifications 64
- Troubleshooting flowcharts 64
- General diagnosis flowchart 65
- Symptoms: 67
- Troubleshooting 69 69
- POST problems flowchart 70
- OS boot problems flowchart 71
- • Redundancy failure 74
- Troubleshooting 75 75
- FCC rating label 76
- Class A equipment 76
- Class B equipment 76
- Modifications 77
- • EMC Directive 2004/108/EC 78
- Japanese notice 79
- BSMI notice 79
- Korean notice 80
- Laser compliance 80
- Battery replacement notice 80
- (Geräuschemission) 81
- Electrostatic discharge 82
- Specifications 83
- Specification Value 84
- Technical support 85
- Technical support 86 86
- Customer Self Repair 87
- Technical support 88 88
- Reparo feito pelo cliente 89
- Technical support 90 90
- Technical support 91 91
- Technical support 92 92
- Acronyms and abbreviations 93
- Version Control Agent 95
- Index 96 96
- Index 97 97
- Index 98 98
- Index 99 99
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant ML310 G5 Server
(115 paginas)
(93 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.180 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales