Hp ProLiant SL210t Gen8 Server Manual de usuario descargar pdf (Pagina 14)

Component identification 14

For more information, see the HP website (http://www.hp.com/support/NMI).

System maintenance switch

Position Default Function

Off Off = iLO security is enabled.

On = iLO security is disabled.

Off Off = System configuration can be

changed.

On = System configuration is locked.

Off Reserved

Off Off = Power-on password is enabled.

On = Power-on password is disabled.

Off Off = No function

On = ROM reads system configuration

as invalid.

— Reserved

— Off = PCIe 64-bit BAR function (large

BAR) is disabled.

On = PCIe 64-bit BAR function (large

BAR) is enabled.

S10

— Reserved

S11

— Reserved

S12

— Reserved

To access the redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to

properly configure the server or data loss could occur.

Drive bay numbering

• Drive bay numbering for four 1U nodes

In an 8-drive bay LFF drive configuration, drives are numbered from top to bottom in each box.

o Drives in the first box correspond to node 1.

o Drives in the second box correspond to node 2.

o Drives in the third box correspond to node 3.

o Drives in the fourth box correspond to node 4.

CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis unless

all bays are populated with a component or a blank.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 102 103

Sin comentarios

Hp ProLiant SL210t Gen8 Server Manual de usuario Pagina 14