Hp ProLiant WS460c G6 Workstation-Blade Manual de usuario descargar pdf (Pagina 31)

Hardware options installation 31

Prepare the hard drive.

3. Install the hard drive.

4. Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("SAS and SATA

hard drive LED combinations" on page 10).

Processor option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent possible workstation blade malfunction and damage to the equipment,

multiprocessor configurations must contain processors with the same part number.

CAUTION: To prevent possible workstation blade overheating, always populate processor

socket 2 with a processor and a heatsink or a processor socket cover and a heatsink blank.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

IMPORTANT: When installing the heatsink, align the guide pins on the processor retention

bracket with the alignment holes in the heatsink.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 108 109

Sin comentarios

Hp ProLiant WS460c G6 Workstation-Blade Manual de usuario Pagina 31