HP RM500SL Manual de usuario descargar pdf (Pagina 23)

0611 RM500SL User’s Guide Version 2.8 Page 23

5.3

Networking setup

FastFacts 5.3: Networking setup

Check 5.2: Networking requirements and connect the RM500SL to your network.

1) Press <Setup> then highlight and <PICK> [Network]

2) In the Network poster, highlight and <PICK> [Enable networking].

3) If your network supports automatic address assignment (DHCP), highlight and

<PICK> [Obtain automatically]. Highlight and <PICK> [Test connection].

4) For manual configuration, highlight and <PICK> [Obtain manually]. Then

highlight each of the 4 boxes in each row and highlight and <PICK> the

numbers, provided by your network administrator, from the drop-down lists.

5) Highlight and <PICK> [Test connection]. The RM500SL will prompt you for an

IP address of a computer or router on your network. In a single PC-to-

RM500SL network, this is the IP address of the PC you are connecting to.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 111 112

Sin comentarios

HP RM500SL Manual de usuario Pagina 23