HP HyperFabric Manual de instalación descargar pdf (Pagina 133)

Troubleshooting HyperFabric

Useful Files

Chapter 5

109

Useful Files

When you are troubleshooting HyperFabric-related problems, you might find it useful to

look at the contents of the following files:

• /etc/rc.config.d/clic_global_conf

This is the global configuration file. Check it to confirm that the configuration

information is correct.

• /var/adm/clic_log

This is a global log file that contains a history of significant HyperFabric events. For

example, it contains a history of the fabric’s startup and any errors that occurred

during it.

• /var/adm/clic_log.old

This is the backup copy of the log file that is created when the log file grows larger

than 100 Kbytes

• /var/adm/OLDclic_log

This is the log file from the previous time the clic_start command was executed.

• /var/adm/syslog.log

This is the system log file, which contains a history of events occurring on the

HP 9000 system.

• /var/adm/clic_ip_drv.trc

This is one of the HyperFabric software’s trace files, and it is created by the

clic_diag -D TCP_IP command.

• /var/adm/clic_ip_drv.trc0

This is one of the HyperFabric software’s trace files, and it is the primary file created

by the clic_diag -C TCP_IP command.

• /var/adm/clic_ip_drv.trc1

This is one of the HyperFabric software’s trace files, and it is created by the

clic_diag -C TCP_IP command when the primary trace file (clic_ip_drv.trc0)

becomes full.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 155 156

Sin comentarios

HP HyperFabric Manual de instalación Pagina 133