HP 24S Guía de usuario descargar pdf (Pagina 42)

IP Address The IP address of the hub, written in the format X.X.X.X.

Each number between the decimal points is a decimal number

between 0 and 255. Every IP address on a network must be

unique. The default is 0.0.0.0, which disables IP communications

on the hub.

Subnet Mask The bit mask defining which portion of the IP address is the

subnet address, written in the format X.X.X.X. A default value is

automatically generated and depends on the class of IP address

that has been entered. See your network administrator for the

subnet mask used by all devices on your IP network.

Primary Default

Router

The IP address of the nearest IP router in your network. The

default value is 0.0.0.0. If no IP routers are in your network,

enter the address of a network management station, if any.

Backup Default

Router

The IP address of the router used in place of the primary default

router when it is inaccessible. The default value is 0.0.0.0. If

there is no backup router, or no primary default router, use

0.0.0.0.

Time To Live The number of IP routers a packet is allowed to cross before the

packet is discarded. The default value is 32. Increase this value

if the hub will be sending IP packets to a destination that is more

than 32 routers away. The maximum is 255.

See your network administrator for these IP settings. See appendix D for information on

setting the IP address.

At the end of the process of changing the IP configuration, the hub will be reset. This

terminates the console session (and disconnects the phone line if using a modem) and

resets the console port baud rate to be automatically sensed. To restart the session, when

the reset process completes, press RETURN several times for the prompt.

3-6 Operation

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 101 102

Sin comentarios

HP 24S Guía de usuario Pagina 42