HP 24SII Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
APPENDIX B
MODEL 24SII MODULE INSTALLATION
B.1 MODEL 24SII I/O MODULE
INSTALLATION
Each I/O module provided by BayTech includes one of the following
L-shaped modules:
You will need the following equipment:
1 x straight-slot screwdriver
1 x phillips-head screwdriver
1. IMPORTANT: Remove power from the unit by depressing the
power switch on the front of the unit to OFF and also remove
power cord from socket.
2. I/O modules must be installed in sequence from left to right
(facing rear of unit). There can be no empty slots between
modules. For example, if I/O modules are currently installed in
the first three module slots, the new module must be installed
in the 4th module slot. The module slots are labeled on the top
panel as "Module 1", "Module 2", ..., "Module 6".
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 167 168

Comentarios a estos manuales

Sin comentarios