HP 24SII Manual de usuario descargar pdf (Pagina 51)

If you are connecting a device other than another BayTech product,

you must refer to the operator's manual for your equipment to

determine which pins are defined as TX+, TX-, RX+, and RX-.

If you are using 4-wire Operation and bidirectional Printer Sharing

Mode and connecting to another BayTech product (such as Tran-x),

please refer to

Appendix A.7.4

for the recommended cable pinout.



  



COMPUTER PORTS

NOTE: Computer ports using this configuration will support hardware

handshaking only. You must ensure hardware handshaking is

supported by the equipment that will connect to these ports.

Computer ports on the M24SII-V07 module using EIA-422 Protocol, 4-

wire Operation, and unidirectional Printer Sharing Mode utilize the

following pins and signals for communication:

RJ-11 PIN-OUT INFORMATION

PIN SIGNAL

EIA-422

DIRECTION DESCRIPTION

1 HSO+ Output Handshake Out (+)

2 HSO- Output Handshake Out (-)

3 RX- Input Receive Data (-)

4 RX+ Input Receive Data (+)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 167 168

Sin comentarios

HP 24SII Manual de usuario Pagina 51