HP 24SII Manual de usuario descargar pdf (Pagina 48)



 



COMPUTER PORTS

NOTE: Computer ports using this configuration will support hardware

handshaking only. You must ensure hardware handshaking is

supported by the equipment that will connect to these ports.

Computer ports on the M24SII-V07 module using EIA-232 Protocol, 4-

wire Operation, and unidirectional Printer Sharing Mode utilize the

following pins and signals for communication:

RJ-11 PIN-OUT INFORMATION

PIN SIGNAL

EIA-232

DIRECTION DESCRIPTION

1 NC ---- No connection

2 DTR Output Handshake Out,

enable/disable the receiving

of characters

3 RX Input Receive Data

4 GND ---- Signal Ground

If you are connecting a device to a computer port on the M24SII-V07

module using EIA-232 Protocol, 4-wire Operation, and unidirectional

Printer Sharing Mode, please see

Appendix A.7.3

for adapter pinouts

and recommended cabling.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 167 168

Sin comentarios

HP 24SII Manual de usuario Pagina 48