HP Brio 82xx Información técnica Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 114
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
Accessing Internal Components
49
Accessing Internal Components
Removing and Replacing the Main Cover
WARNING
For your safety, disconnect the power cord and all external cables.
To Remove the Main Cover
1 Place the PC on a flat surface and stand behind it.
2 Disconnect all cables from the rear of the PC.
3 Loosen the two thumb screws at the rear of the PC.
4 Slide the cover back by about 2 cm (0.6 inches).
5 Tip the cover to the side and lift it off.
To Replace the Main Cover
1 Position the metal flap on the bottom inside of the cover over the guide
rail of the PC, leaving a gap of about 2 cm (0.6 inches) between the
cover and the front of the PC.
2 Tilt the cover towards the PC.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 113 114

Comentarios a estos manuales

Sin comentarios