3 Chapter 2
Note: Failure to load the primer at this step will cause the conversion to
fail.
b) Copy the primer from the T1010/T1010 Primer directory on the CD and place in
the directory created in Step 2.
c) From the Compaq Connection Manager Screen press (F2), select “Sys Info” tab.
d) From the T1010 setup screen (F2), Select Upgrade Tab, Select USE LOCAL
FTP INFORMATION, enter IP of the FTP server in the field SERVER NAME and
in the field, SERVER DIRECTORY; the directory name of where the files reside.
e) Click on the Upgrade button. After the T1010 contacts the IIS/FTP server, a
Firmware Upgrade Warning will appear on the terminal indicating that a firmware
upgrade is in process. Click on the Start button
f) After the Primer load is completed, the terminal will reboot, displaying a WYSE
Splashscreen.
Warning
Select the image from the correct directory on the CD. The image must match
the unit model number and the image size must match the total flash size.
Selecting the wrong size image may cause firmware corruption and render the
unit inoperable.
9) Install the CE.Net image.
a) Copy the image from the T1010 directory on the CD and place in the directory
created in Step 2.
i) Double click on the System icon the click on the System Info tab to verify
the flash size. Click the OK button.
ii) Depending on the flash size 16MB (or 24MB if it is an 8MB unit with a
16MB flash kit)with or 32MB (or 48MB if it is a 8mb unit with 32MB flash
kit) copy the two files (XXXX.bin & params.ini) from the corresponding
T1010 16MB or 32MB subdirectory on the CD and place in the directory
created in Step #2
b) From the Winterm Connection Manager screen double click on the Control Panel
button.
c) From the Winterm Control Panel double click the Upgrade icon. Select USE
LOCAL FTP INFORMATION; enter IP of the FTP server in the field SERVER
NAME and in the field SERVER DIRECTORY; the directory name of where the
files reside.
d) Click on the Upgrade button. After the T1010 contacts the IIS/FTP server, a
Firmware Upgrade Warning box will appear on the terminal indicating that a
firmware upgrade is in process. Click on the Start button.
e) A warning screen will appear. Click on the Yes button.
f) After the terminal Firmware upgrade is completed, the terminal will reboot,
displaying a WYSE Splashscreen.
10) The terminal is ready for use.
11) Shutdown the terminal and install the Microsoft Certificate of Authenticity, COA, and
Wyse serial label as shown in Figure 1-1 below.
Note: Failure to install the labels may cause delays in service and support. This
serial number must be give to the Customer Support Technician to validate
entitlement to support and service from Wyse.
(246 paginas)
(268 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales