HP T1010 - Windows-based Terminals - 48 MB RAM Manual de usuario descargar pdf (Pagina 16)

8 Chapter 2

i) From the Compaq Connection Manager Screen double click on the

Control Panel button.

ii) Double click on the System icon the click on the System Info tab to verify

the flash size. Click the OK button.

b) Depending on the flash size, 16MB or 32MB, copy the two files (XXXX.bin &

params.ini) from the corresponding, T20 16MB or 32MB, subdirectory on the CD

and place in the directory created in Step 2. The largest image on the CD is

32MB.

c) From the Compaq Connection Manager screen double click on the Control Panel

button.

d) From the Compaq Control Panel double click the Upgrade icon. Select USE

LOCAL FTP INFORMATION; enter IP of the FTP server in the field SERVER

NAME and in the field SERVER DIRECTORY; the directory name of where the

files reside.

e) Click on the Upgrade button. After the T20 contacts the IIS/FTP server, a

Firmware Upgrade Warning box will appear on the terminal indicating that a

firmware upgrade is in process. Click on the Start button. The upgrade process

will begin.

f) After the terminal Firmware upgrade is completed, the terminal will reboot,

displaying a WYSE Splashscreen.

8) The terminal is ready for use.

9) Shutdown the terminal and install the Microsoft Certificate of Authenticity, COA, and

Wyse serial label as shown in Figure 2-2 below. Labels in the kit are similar to those

in the figure.

Note: Failure to install the labels may cause delays in service and support. This

serial number must be given to the Customer Support Technician to validate

entitlement to support and service from Wyse.

Figure 2-2 T20 Serial label placement

Install the Wyse serial

label as shown being

sure not to cover the

original serial number.

Install the

Microsoft CE.Net

COA as shown

here.

1 2 ... 11 12 13 14 15 16

Sin comentarios

HP T1010 - Windows-based Terminals - 48 MB RAM Manual de usuario Pagina 16