HP CH336A#B1K Manual de usuario Pagina 101

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 285
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 100
Service Calibrations
5-2
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Service Calibrations
The following is a list of all internal service calibrations available in
the Printers. Instructions for entering the service calibrations menu
are given on Page 5-3.
1 Printhead Alignment Page 5-5
The purpose of this Service Calibration is to correct the alignment
between the Printheads. This calibration is necessary in order to
prevent color misalignment and print quality defects like banding.
2 Color Calibration Page 5-7
The purpose of this Calibration is to calibrate the ink system for the
specific media loaded into the Printer. The Printer stores the
calibration data for each type of media that has been calibrated since
the Printer was switched ON. If the Printer is switched OFF, it will
only store the last calibration done.
3 Advance Calibration Page 5-9
The purpose of this Service Calibration is to calibrate the nominal
advance of the media. This calibration is necessary to control the
exact movement on the media type that will be used (upto 2) in
order to avoid print quality problems like banding.
4 Factory Advance Calibration Page 5-11
The purpose of this Service Calibration is to calibrate the nominal
advance of the media. This calibration is necessary to control the
exact movement of the media in order to avoid print quality problems
like banding. The values from the Calibration will then be stored in
the EEROM and the user can restore the Printer to these values by
selecting "Restore factory" in the Advance Calibration menu.
Vista de pagina 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 284 285

Comentarios a estos manuales

Sin comentarios