HP DesignJet ColorPro CAD Manual de usuario descargar pdf (Pagina 76)

Operating Overview2-18

Using the Control Panel

MIO Menu

This menu is available only if the MIO card is installed. It is controlled by the MIO print

server which has been installed on the printer and thus varies accordingly. Please refer to

the documentation that comes with the print server for more information.

PostScript Menu (for HP DesignJet ColorPro GA printer or with

PostScript Upgrade Kit installed only)

Item Value Explanation

PRINT PS ERRORS=

OFF

Select ON to print the PS error page

when a PS error occurs.

JAM RECOVERY=

AUTO

OFF

Determines how the printer behaves

when a paper jam occurs.

AUTO: The printer automatically selects

the best mode for printer jam recovery

(usually ON). This is the default setting.

ON: The printer automatically reprints

pages after a paper jam is cleared.

OFF: The printer does not reprint pages

following a paper jam. Printing

performance might be increased with this

setting.

COPIES=1 1 to 99

Sets the default number of copies by

selecting any number from 1 to 99.

Press [ Value ] once to change the setting

by increments of 1 or hold down

[ Value ] to scroll through the settings.

www.GovTechMedia.com

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 261 262

Sin comentarios

HP DesignJet ColorPro CAD Manual de usuario Pagina 76