Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 102)

Other Network Settings

6-19

set the distance between aps

set the distance between apsset the distance between aps

set the distance between aps

– 3 = wireless card in Slot A

– 4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> distaps <large, medium, small, minicell, microcell>

[Device Name]>reboot 0

This feature is only available for 802.11b wireless cards.

NOTE:

The distance between APs should not be approximated. It is calculated by means of a manual Site Survey, in which

an WL520 unit is set up and clients are tested throughout the area to determine signal strength and coverage, and

local limits such as physical interference are investigated. From these measurements the appropriate cell size and

density is determined, and the optimum distance between APs is calculated to suit your particular business

requirements.

set the multicast rate

set the multicast rateset the multicast rate

set the multicast rate

– 3 = wireless card in Slot A

– 4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> multrate <1,2,5.5,11 (Mbps)>

This feature is only available for 802.11b wireless cards.

NOTE:

The Distance Between APs must be set before

must be set beforemust be set before

must be set before the Multicast Rate.

set ethernet speed and transmission mode

set ethernet speed and transmission modeset ethernet speed and transmission mode

set ethernet speed and transmission mode

[Device Name]>set etherspeed <value (see below)>

[Device Name]>reboot 0

set interface management services

set interface management servicesset interface management services

set interface management services

set communication ports

set communication portsset communication ports

set communication ports

[Device Name]>set httpport <HTTP port number (default is 80)>

[Device Name]>set telport <Telnet port number (default is 23)>

set telnet session timeouts

set telnet session timeoutsset telnet session timeouts

set telnet session timeouts

[Device Name]>set tellogintout <time in seconds>

[Device Name]>set telsessiontout <time in seconds>

ethernet speed and transmission mode

ethernet speed and transmission modeethernet speed and transmission mode

ethernet speed and transmission mode value

valuevalue

value

10 Mbit/s - half duplex 10halfduplex

10 Mbit/s - full duplex 10fullduplex

10 Mbit/s - auto duplex 10autoduplex

100 Mbit/s - half duplex 100halfduplex

100 Mbit/s - full duplex 100fullduplex

Auto Speed - half duplex autohalfduplex

Auto Speed - auto duplex autoautoduplex (recommended)

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 141 142

Comentarios a estos manuales

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 102

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Hp ProCurve 520wl Wireless Access Point