Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 118)

Parameter Tables

6-35

tcp/udp port filtering

tcp/udp port filteringtcp/udp port filtering

tcp/udp port filtering

The following parameters are used to enable/disable the Port filter feature.

The following parameters are used to configure TCP/UDP Port filters.

syslog parameters

syslog parameterssyslog parameters

syslog parameters

The following parameters configure the Syslog settings.

NOTE:

The Heartbeat parameters are advanced settings not available via the HTTP interface. When Heartbeat is enabled,

the WL520 periodically sends a message to the Syslog server to indicate that it is active. The frequency with which the

heartbeat message is sent depends upon the setting of the Heartbeat Interval.

name

namename

name type

typetype

type values

valuesvalues

values access

accessaccess

access cli

clicli

cli

Port Filtering Group N/A R portflt

Port Filter Status Integer enable (default)

disable

RW portfltstatus

name

namename

name type

typetype

type values

valuesvalues

values access

accessaccess

access cli

clicli

cli

Port Filtering Table Table N/A R portflttbl

Table Index N/A User Defined

(there are also 4 pre-defined

indices, see “

Port Number”

below for more information)

Rindex

Port Type Octet String TCP

UDP

TCP/UDP

RW porttype

Port Number Octet String User Defined

(there are also 4 pre-defined

protocols:

NetBios Name Service – 137,

NetBios Datagram Service –

138, NetBios Session Service

– 139, SNMP Service – 161)

RW portnum

Protocol Name DisplayString User Defined

(there are also 4 pre-defined

protocols, see ”

Port

Number

” above)

RW protoname

Interface Bitmask Integer32 1 (Ethernet only)

4 (Slot A only)

5 (Slot A & Ether)

8 (Slot B only)

9 (Slot B & Ether)

12 (Slot A & B)

15 (All interfaces)

RW ifbitmask

Status Integer enable (1)

disable (2)

delete (3)

RW status

name

namename

name type

typetype

type values

valuesvalues

values access

accessaccess

access cli

clicli

cli

Syslog Group N/A R syslog

Syslog Status Integer enable

disable (default)

RW syslogstatus

Syslog Port Octet String 514 R syslogport

Syslog Lowest Priority Logged Integer 1 – 7

1 = LOG_ALERT

2 = LOG_CRIT

3 = LOG_ERR

4 = LOG_WARNING

5 = LOG_NOTICE

6 = LOG_INFO (default)

7 = LOG_DEBUG

RW syslogpritolog

Heartbeat Status Integer enable (1)

disable (2) (default)

RW heartbeatstatus

Heartbeat Interval (seconds) Integer 1 – 604800 seconds;

900 sec. (default)

RW heartbeatinterval

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 141 142

Comentarios a estos manuales

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 118

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Hp ProCurve 520wl Wireless Access Point