Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 23)

Download the Latest Software

2-10

backup your wl520 configuration file

backup your wl520 configuration filebackup your wl520 configuration file

backup your wl520 configuration file

1. Make sure the TFTP server is running and pointing to the directory where you want to save the file.

2. In the Web Interface, click the

Commands

CommandsCommands

Commands button and select the Upload

UploadUpload

Upload tab.

3. Type in the IP address of your TFTP server.

4. Type in a descriptive name for your configuration file.

5. Select the file type as

config

configconfig

config from the pull down menu.

6. Click

OK OK

OK to upload this information from your WL520 unit to the TFTP server, where it can be retrieved in the event you

reset your WL520 device to factory defaults at some time.

NOTE:

Record the name of this configuration file and the IP address of the WL520 unit so you can easily find it if you need

to download it.

copy a configuration file from another wl520 unit

copy a configuration file from another wl520 unitcopy a configuration file from another wl520 unit

copy a configuration file from another wl520 unit

You can configure multiple units using the same configuration file by uploading the configuration file from one WL520 unit to

the TFTP server, and then download the configuration file to other WL520 units.

CAUTION:

Do not use a static IP address in this configuration file, otherwise you will end up with duplicate IP addresses in your

network!

1. Check to ensure Dynamic IP address is enabled by clicking the

Configure

ConfigureConfigure

Configure button and selecting the IPConfig tab.

2. In the Web Interface, click the

Commands

CommandsCommands

Commands button and select the Upload

UploadUpload

Upload tab.

3. Enter the IP address of your TFTP server.

Figure 2-11

Figure 2-11Figure 2-11

Figure 2-11 Upload Configuration File to TFTP Server

Upload Configuration File to TFTP Server Upload Configuration File to TFTP Server

Upload Configuration File to TFTP Server

4. Enter the name of your configuration file and click

OKOK

OK.

5. Wait for the file to transfer from the WL520 device to the TFTP server.

6. Access the WL520 unit to which you will download the configuration. A system window will notify you when this process

is complete. Confirm by clicking

OKOK

OK.

7. C lick the

Commands

CommandsCommands

Commands button, then select the Download

DownloadDownload

Download tab.

8. Verify the IP address of your TFTP server and enter the name of the file you wish to transfer (refer to Step 3).

9. Set the file type to

config

configconfig

config, and click OK

OKOK

OK.

10. Click

Download

DownloadDownload

Download.

11. The unit will need to be rebooted for the changes to take effect.

12. Repeat this procedure for all the WL520 units you want to configure using this specific file.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 141 142

Comentarios a estos manuales

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Hp ProCurve 520wl Wireless Access Point