HP ProLiant DL140 Guía de instalación descargar pdf (Pagina 27)

HP ProLiant DL140 Server Setup and Installation Guide 19

Figure 3-14: Installing a CD-ROM drive in the tray

Install the CD-ROM drive assembly in the chassis:

1. Place the CD-ROM drive assembly into the chassis (1).

2. Align the tabs along the chassis with the retainers then depress the CD-ROM latch (2).

3. Slide the assembly toward the front of the server (3) until the CD-ROM latch locks the

assembly.

4. Cable the CD-ROM drive assembly (4).

Figure 3-15: Installing a CD-ROM drive assembly in the

chassis

5. Connect the CD-ROM power cable and the CD-ROM drive data cable to the CD-ROM drive.

IMPORTANT: Make sure the CD-ROM drive cable is routed so as to not block airflow to

the fan inlets.

6. Replace the Access cover.

NOTE: The CD-ROM drive assembly can be removed to prevent unwanted software installation

or for use in another ProLiant DL140 server.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Sin comentarios

HP ProLiant DL140 Guía de instalación Pagina 27