HP Netserver 5971-0821 Manual de usuario descargar pdf (Pagina 14)

3. Plug the internal Ultra2 or Ultra3 SCSIdevices to the other cableconnectors,

starting with the connector at the terminated end of the cable.

Figure 1-6. Common Tray Cable Connection

NOTE Internal Ultra2 and Ultra3 SCSI devices come from the factory with

termination disabled and cannot be changed. Proper SCSI bus

termination is provided by the terminator at the end of the LVD SCSI

cable.

4. Connect a power cable from your HP Netserver’s internal power supply to

each internal SCSI device.

Connecting the SCSI Host Adapter to a Hot-Plug Cage

1. Use the point-to-point twisted-pair cable.

2. Plug one end of the twisted-pair cable to the internal LVD/SE connector.

3. Plug the other end of the twisted-pair cable to the 68-pin connector on the

hot-plug cage.

Terminated LVD SCSI Twisted-Pair Cable

Terminator

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 119 120

Sin comentarios

HP Netserver 5971-0821 Manual de usuario Pagina 14