HP Netserver 5971-0821 Manual de usuario descargar pdf (Pagina 59)

10. To install additional adapters, follow the procedures from

Step 4.

11. When complete, select Continue to complete the installation.

DOS Drivers for CD-ROM Access

The CD-ROM drivers need to be installed only if DOS access to a CD-ROM

drive attached to a SCSI host adapter is required. If NetWare is already

installed, or if the CD-ROM drive is not connected to a SCSI adapter, these

drivers do not need to be copied or installed. However, you may choose to

install these drivers if you are having trouble accessing your CD-ROM from

Netware.

NOTE You do not need these drivers for Windows NT or UNIX.

Install CD-ROM Drivers on a DOS Bootable Hard Disk

The following systems files should be modified:

• config.sys

• autoexec.bat

1. Copy the files aspi8u2.sys and aspicd.sys from the DOS directory of the

Ultra3 Family Manager Set disk to your C drive. At the DOS prompt, type

the following lines and press Enter after each line:

mkdir c:\scsi

copy a:\dos\*.* c:\scsi

2. Modify config.sys for loading aspi8u2.sys and aspicd.sys,whichis

necessary for connecting a CD-ROM. Either create this file in C:\ if you do

not currently have a config.sys, or add these lines to the existing config.sys

file. Note that you may need to change the path for the drivers.

device=c:\scsi\aspi8u2.sys /d

device=c:\scsi\aspicd.sys /d:aspicd0

3. Modify autoexec.bat for loading mscdex.exe. Either create this file in C:\

if you do not currently have autoexec.bat, or add these lines to the existing

autoexec.bat file: c:\dos\mscdex.exe /d:aspicd0 /m:12

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 119 120

Sin comentarios

HP Netserver 5971-0821 Manual de usuario Pagina 59