HP Netserver 5971-0821 Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
1
1 Installation and Setup
The HP Ultra3 Single Channel SCSI Host Bus Adapter enables you to connect
up to 15 SCSI devicessuch as hard disk drives, scanners, and CD-ROM
drivesto HP Netservers with 32-bit or 64-bit PCI expansion slots. You can
connect newer Ultra3 and Ultra2 SCSI devices to the two 68-pin Low Voltage
Differential/Single-Ended (LVD/SE) connectors. You can also connect legacy
SCSI devices to the 68-pin and 50-pin internal Single-Ended (SE) connectors.
Figure 1-1. HP Ultra3 Single Channel SCSI Host Bus Adapter
Although the HP Ultra3 SCSI Host Bus Adapter is a 64-bit PCI host bus
adapter, it also works in a 32-bit PCI slot. When installed in a 32-bit PCI slot,
the host bus adapter automatically runs in the slower 32-bit mode. This
installation guide explains how to:
Install the HP Ultra3 SCSI host bus adapter
Set up SCSI devices
Connect SCSI devices
50-pin Internal SCSI SE Controller
68-pin External LVD/SE Connector
J2
68-pin Internal LVD/SE Connector
J6
68-pin Internal SE Connector
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 119 120

Comentarios a estos manuales

Sin comentarios