Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 422
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Figure 2-1 Configuration of an HDLM System When Using an FC-SAN on page
2-4 shows the configuration of an HDLM system using an FC-SAN.
Figure 2-1 Configuration of an HDLM System When Using an FC-SAN
Table 2-1 HDLM System Components When Using an FC-SAN on page 2-4
lists the HDLM system components when using an FC-SAN.
Table 2-1 HDLM System Components When Using an FC-SAN
Components Description
HBA A host bus adapter. This serves as a cable port on the
host.
FC-SAN A dedicated network that is used for the transfer of
data between hosts and storage systems
CHA A channel adapter
P A port on a CHA. This serves as a cable port on a
storage system.
LU A logical unit with which a host can perform I/O
operations. This unit can be accessed from the network.
Dev A logical area (a partition) in an LU
Path A route that connects a host to a Dev in an LU
System Configuration Using an IP-SAN
In an IP-SAN, LAN cables are used to connect hosts to storage systems. The
cable port on the host is called an iSCSI host bus adapter (iSCSI HBA) or a
network interface card (NIC). In order to use an NIC, the iSCSI software
2-4
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 421 422

Comentarios a estos manuales

Sin comentarios