HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario descargar pdf (Pagina 44)

●

HP has provided extra 6-32 hard drive mounting screws installed on the top of the hard drive cage (1) for

installing a hard drive into the 3.5-inch secondary hard drive bay. If you are replacing a hard drive,

remove the mounting screws from the old drive and install them in the new drive.

NOTE: You can also use one of the extra mounting screws to secure the front bezel (see Front bezel

security on page 20 for more information).

CAUTION: To prevent loss of work and damage to the computer or drive:

If you are inserting or removing a drive, shut down the operating system properly, turn o the computer, and

unplug the power cord. Do not remove a drive while the computer is on or in standby mode.

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid

touching the connector. For more information about preventing electrostatic damage, refer to Electrostatic

discharge information on page 10.

Handle a drive carefully; do not drop it.

Do not use excessive force when inserting a drive.

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic elds such as

monitors or speakers.

If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the

package “Fragile: Handle With Care.”

34 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 153 154

Sin comentarios

HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario Pagina 44