HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario descargar pdf (Pagina 51)

Installing a secondary 3.5-inch hard drive

1. Prepare the computer for disassembly (Preparation for disassembly on page 18).

2. Remove the access panel (Access panel on page 19).

3. Install four silver 6-32 mounting screws on the sides of the drive (two on each side).

NOTE: HP has supplied four extra silver 6-32 mounting screws installed on the chassis next to the

primary 3.5-inch hard drive bay. Refer to Installing and Removing Drives on page 33 for an illustration of

the location of the extra mounting screws.

When replacing a drive, transfer the four mounting screws from the old drive to the new drive.

4. Rotate the drive cage to its upright position.

Drives 41

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 153 154

Sin comentarios

HP EliteDesk 800 G2 Small Form Factor PC Manual de usuario Pagina 51