Hp 9000 rp5400 Servers Manual de usuario descargar pdf (Pagina 124)

Removing rp5470 Memory DIMMs

To remove an rp5470 memory DIMM, perform the following steps:

1. Pull up on the extractor levers on each end of the Memory Carrier to unseat the Memory

Carrier from its socket.

2. When the Memory Carrier unseats from the socket, pull it up and away from the System

Board.

3. Loosen the captive screws that secure the DIMM Clip and remove DIMM Clip from the

Memory Carrier.

4. Press down on the extractor levers on each end of the selected memory DIMM to unseat the

DIMM from its socket.

5. When the memory DIMM unseats from the socket, pull it up and away from the Memory

Carrier.

Memory DIMM Replacement

Memory DIMMs reside in slots located on the System Board (up to eight). They are loaded in

DIMM pairs of equal size.

Replacing rp5400 and/or rp5450 Memory DIMMs

To replace a memory DIMM, perform the following steps:

1. Seat the memory DIMM into its socket.

2. Press the extractor levers on each end of the memory DIMM slot inward until the levers

snap into place.

The following graphics show a memory DIMM and a display of DIMM removal/replacement.

124 Removing and Replacing Components

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 162 163

Sin comentarios

Hp 9000 rp5400 Servers Manual de usuario Pagina 124