Hp 9000 rp5400 Servers Manual de usuario Pagina 129

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 163
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 128
Replacing rp5470 Platform Monitor
Looking into the Top Service Bay from the front, the rp5470 model Platform Monitor is located
on the right side at the front of the server.
To replace a Platform Monitor, perform the following steps:
1. Seat the Platform Monitor into its socket.
2. Lift the extractor levers and press them onto each end of the Platform Monitor until the
levers snap into place.
The following graphics show a Platform Monitor board followed by a display of Platform Monitor
removal/replacement.
PCI I/O Card Removal
The side service bay contains card slots for ten PCI I/O cards (slots 3 through 12) and two Core
I/O cards (slots 1 and 2).
Perform the following tasks prior to removing PCI I/O cards:
Power down the server.
Detach all power cords from the server.
To remove a PCI I/O card from the server, perform the following steps:
Individual Component Remove/Replace Instructions 129
Vista de pagina 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 162 163

Comentarios a estos manuales

Sin comentarios