Hp Integrity Superdome 2 Server Manual de usuario descargar pdf (Pagina 51)

10 Enclosure Bay IP Addressing commands

ADD EBIPA

• Command:

ADD EBIPA { BLADE | INTERCONNECT } DNS <ip address> [ { , | - } <bay

number> ]

NOTE: SERVER is a valid alias for BLADE.

• Description:

Adds a DNS server IP address to the list of DNS servers for either BLADE bays or

INTERCONNECT bays

• Access Level/Bay level:

Administrator, Operator

• Restrictions:

A maximum of three DNS servers can be added for EBIPA.◦

◦ The <ip address> must be in the form ###.###.###.###, where each ### ranges

from 0 to 255.

DISABLE EBIPA

CAUTION: This command cycles power to the interconnect and causes a loss of connectivity.

• Command:

DISABLE EBIPA {BLADE|INTERCONNECT} [ALL | <bay number> [{ , | - }

<bay number>]]

• Description:

Disables the ability of the Onboard Administrator to give devices in the bays IP addresses

using DHCP.

If no bay numbers are specified, then EBIPA is disabled for all bays. Devices in bays receive

IP addresses from an external server.

This causes a reset of the iLO, which causes it to attempt to get an IP address from an external

DHCP server. The interconnect is power-cycled.

• Access level/Bay level:

Administrator, Operator

• Restrictions:

None

ENABLE EBIPA

CAUTION: This command cycles power to the interconnect and causes a loss of connectivity.

• Command:

ENABLE EBIPA {BLADE|INTERCONNECT} [ALL | <bay number> [{ , | - }

<bay number>]]

ADD EBIPA 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 216 217

Sin comentarios

Hp Integrity Superdome 2 Server Manual de usuario Pagina 51