Hp ProLiant DL365 Server Manual de usuario Pagina 72
- Pagina / 116
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuration and utilities 72
For more information on ProLiant USB support, refer to the HP website
(http://www.compaq.com/products/servers/platforms/usb-support.html
).
Changing the USB version support
The factory default setting for this server is USB version 1.1. After the OS has loaded, this setting can be
changed to USB version 2.0 using the following steps:
1. Access RBSU by pressing F9 during power up.
2. Select System Options.
3. Select USB External Port Capability.
4. Press Enter to display USB 1.1 and USB 2.0 selections.
5. Arrow down to highlight USB 2.0.
6. Press Enter.
7. Press F10 to save the change and exit RBSU.
Internal USB functionality
An internal USB connector is available for use with USB drive keys only. This solution provides for use of
a permanent boot drive from a USB drive key installed in the internal connector, avoiding issues of
clearance on the front of the rack and physical access to secure data.
For additional security, the external USB connectors can be disabled through RBSU. Disabling external
USB in RBSU disables the front USB connector and both rear USB connectors.
Diagnostic tools
Survey Utility
Survey Utility, a feature within HP Insight Diagnostics (on page 73), gathers critical hardware and
software information on ProLiant servers.
This utility supports operating systems that may not be supported by the server. For operating systems
supported by the server, refer to the HP website (http://www.hp.com/go/supportos
).
If a significant change occurs between data-gathering intervals, the Survey Utility marks the previous
information and overwrites the Survey text files to reflect the latest changes in the configuration.
Survey Utility is installed with every SmartStart-assisted installation or can be installed through the HP PSP
("ProLiant Support Packs" on page 74).
NOTE: The current version of SmartStart provides the memory spare part numbers for the server. To
download the latest version, see the HP website (http://www.hp.com/go/ssdownloads
).
Array Diagnostic Utility
ADU is a tool that collects information about array controllers and generates a list of detected problems.
ADU can be accessed from the SmartStart CD ("SmartStart software" on page 65) or downloaded from
the HP website (http://www.hp.com
).
- HP ProLiant DL365 Server 1
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Rear panel components 9
- Rear panel LEDs and buttons 10
- System board components 11
- System maintenance switch 12
- NMI jumper 12
- SAS and SATA device numbers 14
- SAS and SATA hard drive LEDs 15
- Fan locations 16
- Operations 18
- Remove the access panel 20
- Install the access panel 20
- Operations 23 23
- In this section 24
- Rack planning resources 25
- Optimum environment 25
- Temperature requirements 26
- Power requirements 26
- Rack warnings 27
- Installing hardware options 27
- Registering the server 30
- Introduction 31
- Processor option 31
- Memory options 36
- Memory configurations 37
- Advanced ECC memory 37
- Installing DIMMs 37
- Removing hard drive blanks 39
- Multibay device options 41
- Expansion board options 44
- P400i Controller 48
- Cabling 61
- Cabling 62 62
- Battery pack cabling 63
- Multibay backplane cabling 64
- Configuration and utilities 65
- HP ROM-Based Setup Utility 66
- Array Configuration Utility 67
- Management tools 69
- Erase Utility 70
- Management Agents 70
- HP Systems Insight Manager 70
- Redundant ROM support 70
- USB support 71
- Diagnostic tools 72
- HP Insight Diagnostics 73
- Integrated Management Log 73
- Keeping the system current 74
- Care Pack 75
- Troubleshooting 76
- Symbols on equipment 77
- Warnings and cautions 77
- Symptom information 78
- Loose connections 79
- Service notifications 79
- Troubleshooting flowcharts 80
- General diagnosis flowchart 81
- Symptoms: 83
- Troubleshooting 85 85
- POST problems flowchart 86
- OS boot problems flowchart 87
- Troubleshooting 89 89
- Possible causes: 90
- Redundancy failure 90
- Troubleshooting 91 91
- Battery replacement 92
- FCC rating label 93
- FCC logo, United States only 94
- Modifications 95
- Japanese notice 96
- BSMI notice 96
- Korean notice 97
- Laser compliance 97
- Battery replacement notice 97
- Electrostatic discharge 99
- Specifications 100
- Technical support 102
- Technical support 103 103
- Customer Self Repair 104
- Reparo feito pelo cliente 106
- Technical support 107 107
- Technical support 108 108
- Technical support 109 109
- Acronyms and abbreviations 110
- Index 114 114
- Index 115 115
- Index 116 116
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant DL365 Server
(107 paginas)
(187 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales