HP ProDesk 600 G3 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 38)

a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot

cover on the back of the chassis. Insert a at-bladed screwdriver into the slots on the rear of

expansion slot cover (1) and rock the slot cover back and forth (2) to break it free from the chassis.

b. If you are removing a PCI Express x4 card, hold the card at each end and carefully rock it back and

forth until the connectors pull free from the socket. Lift the card straight up (1), and then away

from the inside of the chassis (2) to remove it. Be sure not to scrape the card against other

components.

30 Chapter 4 Removal and replacement procedures: Small Form Factor

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 149 150

Sin comentarios

HP ProDesk 600 G3 Base Model Small Form Factor PC Manual de usuario Pagina 38