HP ProDesk 600 G3 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 56)

M.2 WLAN module

Description

Intel 8265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

Intel 7265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

Intel 3168 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

The WLAN module is secured with one screw and has two connected antennas.

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the access panel (Access panel on page 21).

3. Remove the drive cage (Drive cage on page 25).

4. Disconnect the antenna cables from the module (1).

5. Remove the screw (2) that secures the module to the computer.

6. Lift the module upward (3), and then pull the module to remove it from the socket (4).

To install the WLAN module, reverse the removal procedure.

NOTE: WLAN modules are designed with a notch to prevent incorrect insertion.

48 Chapter 4 Removal and replacement procedures: Small Form Factor

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 149 150

Sin comentarios

HP ProDesk 600 G3 Base Model Small Form Factor PC Manual de usuario Pagina 56