HP P3005dn Guía de usuario descargar pdf (Pagina 144)

Automatically print on both sides

The duplexing unit in the device prints on two sides of a sheet of paper when the Print on Both

Sides option is specified in the print job. The HP LaserJet P3005 printer comes with a duplexing unit

installed in the following models:

●

HP LaserJet P3005dn

●

HP LaserJet P3005x

The HP LaserJet P3005 printer supports smart duplexing. The smart duplexing feature increases

printing performance by preventing one-page print jobs or single-sided pages of a duplexed print job

from going through the duplexing unit even when the duplexing feature has been selected in the driver.

The smart duplexing feature is available for all media types, except for those that cannot be printed on

both sides and certain others. Media types that are not supported are shown in the following list:

●

Labels

●

Envelopes

●

Transparency

●

Prepunched

●

Preprinted

●

Letterhead

When the media type is set to Unspecified, the smart duplexing feature is disabled.

To achieve the best print quality when printing on the second side of the page, the printer makes

adjustments to its print modes. Selecting a media type, in effect, instructs the printer to use a group of

settings, such as fuser temperature and print speed, to create an image that has the best possible quality

for that media. This group of settings is known as a mode or print mode, and a different print mode is

used with each media type. Print-mode adjustments are automatic when the duplexing unit is used.

Manually printing on both sides

Select the Print on Both Sides (Manually) check box to print on the second side of the media. Because

the HP LaserJet P3005 and HP LaserJet P3005n printer models do not have a duplexing unit installed,

this is the only setting available for duplex printing. Use the Print on Both Sides (Manually) on the

other HP LaserJet P3005 printer models for media types that the automatic duplexing unit does not

support, such as cardstock and thick media.

Manually printing on the second side of a page is available in the HP Traditional PCL 6 Driver or the

HP Traditional PCL 5 Driver. (The PS Emulation Driver does not support this feature.) If a duplexing unit

is installed and manual duplexing is enabled in the driver, the device automatically prints on both sides

of media types that are supported for automatic duplexing (Letter, A4, Legal, and 8.5 x 13, only), and

forces manual printing on both sides for media types that are not supported.

To make the Print on Both Sides (Manually) check box available in the document options, select

the Allow Manual Duplexing check box on the Configure tab in the Properties print-driver tabs.

If you want to print on both sides manually while using media that is supported for automatic duplexing,

you must click to clear the Duplexing Unit check box on the Configure tab.

120 Chapter 4 HP traditional print drivers for MS Windows ENWW

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 405 406

Comentarios a estos manuales

Sin comentarios

HP P3005dn Guía de usuario Pagina 144

Comentarios a estos manuales

Relacionado con productos y manuales para Las Impresoras Láser / Led HP P3005dn