HP P3005dn Guía de usuario Pagina 321

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 406
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 320
9. In the Collation in Printer drop-down menu, choose one of the following options, depending on
the device configuration:
Yes – Total RAM > 80 MB or Hard Disk
No – Total RAM < 80 MB and No Hard Disk
10. If the device has the optional 250-sheet tray 3, choose Tray 3.
11. If the device has a duplex unit (a standard feature on the HP LaserJet P3005dn and
HP LaserJet P3005x models), select the Duplex Unit check box.
12. Click Apply Changes, and then close the Printer List dialog.
Troubleshooting the printer setup
If the printer does not appear in the printer list after an installation:
Carry out each one of these solutions in the order given, and restart the setup process after each one
to see if the issue has been resolved.
Verify that the USB or network cable is connected between the device and the computer and that
the device is powered on.
Try disconnecting and reconnecting the cable. If the computer has more than one USB port, try a
different USB port.
Turn the device off and then back on again.
Turn the computer off and then back on again.
If you are using a USB hub on the computer, disconnect the other USB devices from the hub.
If the wrong PPD appears in the Kind column in the printer list after an installation:
1. Unplug the USB cable.
2. Delete the print queue with the incorrect type (for example, Generic PostScript Printer).
3. Reinstall the device software.
4. Turn the computer off and then on again.
5. Reconnect the USB cable from the computer to the device.
If these steps do not resolve the problem, delete the incorrect print queue, click Add, choose the device
from the list, and then browse manually for the HP LaserJet P3005 Series PPD.
Uninstall the Macintosh printing system
Follow these instructions to uninstall the Macintosh Printing System.
1. Browse to the folder containing the PPDs. In Mac OS X V10.2.8 or later, the PPDs are installed
in System/Library/Printers/PPDs/Contents/Resources:<lang>.lproj, where <lang> is the
appropriate language.
2. Choose the HP LaserJet P3005.gz file and drag it to Trash.
ENWW Macintosh install and uninstall instructions 297
Macintosh
Vista de pagina 320
1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 405 406

Comentarios a estos manuales

Sin comentarios