HP P3005dn Guía de usuario descargar pdf (Pagina 289)

The HP LaserJet P3005 printer supports smart duplexing. The device uses the smart duplexing feature

to detect information on both sides of the print job pages and only runs the pages through the duplexing

unit if printable information appears on the second side of the page.

Allow Manual Duplexing

Select Allow Manual Duplexing to print on both sides of any size and most types of media (except

transparencies, envelopes, and labels). To use this feature, reinsert the media stack into the input tray

to print the second side. The device pauses while the user makes this adjustment.

This setting is enabled by default.

Printer Memory

This option matches the setting to the amount of memory that is installed in the device. The driver

generates ranges of memory that can be selected, up to the maximum that the device can accept (320

MB for the HP LaserJet P3005 printer). The driver can use this information to manage how the print

driver uses the device memory.

Printer Hard Disk

NOTE A printer hard disk is optional for the HP LaserJet P3005 printer. Do not select the

Installed setting unless a hard disk is installed.

Job storage

When Job Storage is enabled, the device can store print jobs so that you can gain access to those print

jobs later at the control panel.

Mopier Mode

The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated

copies from a single print job. Multiple-original printing (mopying) increases performance and reduces

network traffic by transmitting the job to the device once, and then storing it in memory. The remainder

of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be

created, controlled, managed, and finished from the computer, which eliminates the extra step of using

a photocopier.

NOTE The Mopier Mode function is not available without a hard disk.

The HP LaserJet P3005 supports the transmit-once mopying feature when the Mopier Mode: setting

on the Device Settings tab is Enabled.

Use the HP PCL 6 Unidriver, HP PCL 5 Unidriver, or PS Emulation Unidriver to perform mopying in one

of two ways: either through the software or through the device hardware. When the mopier is enabled,

mopying takes place through the device hardware by default. One copy of a multiple-page print job is

transmitted once through the network to the device, together with a printer job language (PJL) command

directing the device to make the specified number of copies.

When the mopier is disabled, mopying is not necessarily disabled. The driver can perform mopying

through the software rather than the device hardware (the mopying path that is disabled when you

change the Mopy Mode setting to Disabled). However, sending a multiple-copy print job when the

mopier is disabled eliminates the advantage of transmitting the print job once, because the job is sent

through the network for each copy.

ENWW Device Settings tab features 265

HP unidrivers for

Windows

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 405 406

Sin comentarios

HP P3005dn Guía de usuario Pagina 289