HP P3005dn Guía de usuario descargar pdf (Pagina 264)

NOTE As a rule, extra memory is not needed on the HP LaserJet P3005 printer in order to print

on both sides. However, very complex double-sided print jobs might require additional memory.

Topics:

●

Automatically print on both sides

●

Manually print on both sides

Automatically print on both sides

The duplexing unit in the device prints on two sides of a sheet of paper when the Print on Both

Sides option is specified in the print job. The HP LaserJet P3005 printer comes with a duplexing unit

installed in the following models:

●

HP LaserJet P3005dn

●

HP LaserJet P3005x

These printer models support smart duplexing. The smart duplexing feature increases printing

performance by preventing one-page print jobs or single-sided pages of a duplexed print job from going

through the duplexing unit even when the duplexing feature has been selected in the driver.

All media types support the smart duplexing feature, except for media types that cannot be printed on

both sides (such as labels, transparencies, and envelopes) and the following media types:

●

Prepunched

●

Preprinted

●

Letterhead

When the media type is set to Unspecified, the smart duplexing feature is disabled.

To achieve the best print quality when printing on the second side of the page, the printer makes

adjustments to its print modes. Selecting a media type in effect instructs the printer to use a group of

settings (such as fuser temperature and print speed) to create an image that has the best possible quality

for that media. This group of settings is known as print mode. A different print mode is used with each

media type. Print-mode adjustments for the second side of a duplexed page are automatic.

Manually print on both sides

Select the Print on Both Sides (Manually) check box to print on the second side of the media because

the HP LaserJet P3005 and HP LaserJet P3005n printer models do not have a duplexing unit installed.

AUse this setting on the other HP LaserJet P3005 printer models for media types that the automatic

duplexing unit does not support, such as cardstock and thick media.

Manually printing on the second side of a page is available in the HP PCL 6, PCL 5, or PS emulation

unidriver. If a duplexing unit is installed and manual duplexing is enabled in the driver, the printer

automatically prints on both sides of media types that are supported for automatic duplexing (Letter, A4,

Legal, and 8.5 x 13 only), and forces manual printing on both sides for media types that are not

supported.

To make the Print on Both Sides (Manually) check box available in the document options, select

the Allow Manual Duplexing option on the Device Settings tab in the Properties print-driver tabs.

240 Chapter 5 HP PCL 6, PCL 5, and PS emulation unidrivers for MS Windows ENWW

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 405 406

Comentarios a estos manuales

Sin comentarios

HP P3005dn Guía de usuario Pagina 264

Comentarios a estos manuales

Relacionado con productos y manuales para Las Impresoras Láser / Led HP P3005dn