HP P3005dn Guía de usuario descargar pdf (Pagina 317)

NOTE If the automatic selection fails, or if you want to manually select a .PPD file, click

the Printer Model pull-down menu, select HP, and then select the .PPD file that you want

to add. If the HP LaserJet P3005 Series PPD does not appear in the Model Name list, turn

the computer off and then on again and restart the setup process.

If you are using IP Printing, carry out the following steps:

a. Choose Socket/HP Jet Direct from the Printer Type pull-down menu. This is the

recommended setting for HP devices.

b. Print the device configuration pages.

To print the configuration pages, follow these instructions.

i. Press theMenu button to open the menus.

ii. Press

(the up arrow) or (the down arrow) to scroll to INFORMATION, and then press

(select).

iii. Press

(up) or (down) to scroll to PRINT CONFIGURATION.

iv. Press

(select) to print the configuration pages.

c. On the first configuration page, under IPv4, find the IP Address. Type this address into the

Printer Address field on the add printer screen.

d. Select the Printer Model and select HP LaserJet P3005 in the Model Name list. If the

HP LaserJet P3005 Series PPD does not appear in the Model Name list, turn the computer

off and then on again and restart the setup process.

6. Click Add. The HP LaserJet P3005 appears in the Printer List.

7. To configure installable options such as a duplexing unit or optional paper tray, click Show Info?

on the device list and choose Installable Options in the pull-down menu.

8. In the Collation in Printer drop-down menu, select one of the following options, depending on the

device configuration:

●

Yes – Total RAM > 96 MB or Hard Disk

●

No – Total RAM < 96 MB and No Hard Disk

9. If the device has the optional 500-sheet tray 3, select the appropriate tray.

10. If the device has a duplex unit (a standard feature on the HP LaserJet P3005dn and

HP LaserJet P3005x models), select the Duplex Unit check box.

11. Click Apply Changes, and then close the Printer List dialog.

Set up a printer with Mac OS X V10.2.8

1. If you are installing the device using a USB connection, connect the USB cable between the

HP LaserJet P3005 printer and the computer. Turn on the device. If you are installing using a

network connection, verify that the network cable is connected to the device and the device is on.

ENWW Macintosh install and uninstall instructions 293

Macintosh

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 405 406

Sin comentarios

HP P3005dn Guía de usuario Pagina 317