HP 9500mfphp Manual de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 354
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
http://www.hp.com/go/clj9500mfp
28 Chapter 1 – MFP basics
Rev. 1.0
To set a standard size for tray 2, tray 3, and the 2,000-sheet side input tray
(tray 4)
The MFP automatically detects the size that is loaded, so you do not need to set the size manually.
To set or change a custom size for tray 2 and tray 3
1 Make sure that the switch inside the tray that you want to configure is in the Custom position.
2 A message on the control panel prompts you to specify the paper size.
3 Touch the appropriate unit of measure (M
ILLIMETERS or INCHES). (The default is MILLIMETERS because the marks on
the tray guides are in millimeters.)
4 Use the numeric keypad to specify the tray X (front-to-back) dimension.
5 Use the numeric keypad to specify the tray Y (left-to-right) dimension.
6 Touch
EXIT to exit the menus.
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 353 354

Comentarios a estos manuales

Sin comentarios