HP B8C95AA Manual de usuario Pagina 143

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 142
HP Designjet T Series — Service Manual 3-35
Service Tests (Diagnostics)
If there is a Failure at any point during the tests, the Front Panel will display
the relevant System Error Code. To trouble shoot any displayed error
codes, see
System Error Codes - Full Descriptions on page 2-7.
2 The Rewinder te
st starts and the front Panel displays the following messages:
Starting Horsburgh.
Starting Nvm
Accessing Nvm
Starting PWM ManagerLuna
Starting ENC ManagerLuna
Setting encoder position
3 The Front Panel prompts you to make sure the media is unloaded and the
spin
dle is removed.
4 Remove the media from the printer.
5 Remove the spindle from the spindle holders.
6 Press any key to continue.
7 The Front Panel displays the following messages and results:
Moving Rewinder Forward
Moving Rewinder Backward
8 The Front Panel shows the test complete display for a few seconds.
9 The Front Panel prompts you to shutdown the printer to complete the test.
10 Press any key to shutdown the printer.
Vista de pagina 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 489 490

Comentarios a estos manuales

Sin comentarios