HP B8C95AA Manual de usuario descargar pdf (Pagina 299)

HP Designjet T Series — Service Manual 6-63

Removal and Installation - Service Station (T1100/T1100ps/T610)

8. Loosen the T-10 uncapping screw

sufficiently so you can manually move the

Carriage Assembly in step

8.

If you are uncapping a 44 inch

printer, you will need to use either

a very long or very short

screwdriver to loosen the

uncapping screw. In this way, you

can loosen the screw and pass the

rewinder motor.

9. Push the Carriage Assembly into the print

path to gain access to two T-10 screws

that secure the Service Station to the

Carriage Rail.

10. Remove the two allen screws that secure

the Service Station to the Carriage Rail. To

avoid damaging the Encoder Strip, you

can use a standard screwdriver.

Support the Service Station so

it does not fall when you

remove the attachment

screws.

44 inch T1100 printer shown (with Rewinder)

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 489 490

Comentarios a estos manuales

Sin comentarios