HP B8C95AA Manual de usuario Pagina 441

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 440
HP Designjet T Series — Service Manual 6-205
Removal and Installation - Electronics Module Main PCA and PSU (T1120/T1120ps)
Electronics Module Main PCA and PSU (T1120/T1120ps)
Removal
1. Remove the Left Cover on page 6-30.
2. Disconnect all the connectors on the
Electronics Module. The ferrite on the left
will be located under the board, so take
care.
The two parallel connectors,
white (A) and black (B), on the
right of the board, cannot be
connected backwards or
swapped.
The harness cable (A) connects to
the white connector. The flat
cable (B)connects to the black
connector.
3. Unroute all the cables disconnected in the
previous step.
4. Remove two T-15 screws that secure the
Electronics Module to the Printer.
Switch off the printer and remove the power cable.
A
B
Vista de pagina 440
1 2 ... 436 437 438 439 440 441 442 443 444 445 446 ... 489 490

Comentarios a estos manuales

Sin comentarios