HP B8C95AA Manual de usuario descargar pdf (Pagina 68)

System Error Codes

2-8 HP Designjet T Series — Service Manual

System Error: 01.1:YZ (T1100/T1100ps/T610 ONLY)

Problem

Description:

Error in the Print Mech PCA.

Corrective Action: Try the following:

1 Switch the Power OFF from the back of the Printer and disconnect the Power

cor

d. Reconnect the power cord and power On the Printer.

2 If the System Error continues, replace the Main PCA. See

Electronics Module

Main PCA and PSU (T1100/T1100ps/T610) on page 6-202 or Electronics

Module Main PCA and PSU (T1120/T1120ps) on page 6-205.

3 If the System Error continues, replace the Formatter. See

Formatter on page

6-200.

System Error:

01.2:YZ

Problem

Description:

Failure reading acumen chip of an Ink Supply Station.

Corrective Action: Try the following:

1 Switch the Power OFF from the back of the Printer and disconnect the Power

cor

d. Reconnect the power cord and power On the Printer.

2 Check that there are not two cartridges of the same color installed.

3 Perform the Ink Delivery System diagnostic test. See

7. Ink Delivery System

(IDS) on page 3-36.

– If the test finds that the ink supply is defective, replace it.

– If the test does not find any errors, remove all the ink supplies from the

S and reboot the printer.

4 Install the ink cardtriges with the printer booted in normal mode. Use the

eplacement option available from the Front Panel and install the cartridges

one by one. If an error appears after installing a supply, the last supply you

installed is defective. Replace it.

5 If the S

ystem Error continues, replace the Main PCA. See

Electronics Module

Main PCA and PSU (T1100/T1100ps/T610) on page 6-202 or Electronics

Module Main PCA and PSU (T1120/T1120ps) on page 6-205.

6 If the System Error continues, replace the Left Ink Supply Station. See

Left Ink

Supply Station on page 6-183.

System Error:

02.1:YZ

Problem

Description:

Problem with the Carriage PCA.

Corrective Action: Try the following:

1 Switch the Power OFF from the back of the Printer and disconnect the Power

cor

d. Reconnect the power cord and power On the Printer.

2 Check that the Trailing Cable is not damaged.

3 Check that the Trailing Cable is correctly connected between the Main PCA

and C

arriage PCA.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 489 490

Comentarios a estos manuales

Sin comentarios

HP B8C95AA Manual de usuario Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP B8C95AA