HP B8C95AA Manual de usuario Pagina 197

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 196
HP Designjet T Series — Service Manual 4-11
Service Calibrations
pattern 90° clockwise and reload it printed-side down, so that the black
arrows go into the printer first. Press the OK key to continue.
Only scan the Calibration Pattern in the Printer that was used to actually
print it. Using the Calibration in a different Printer could cause it to
experience media advance problems.
After scanning the Calibration Pattern, it should be discarded.When
Loading the Calibration Pattern, use the Cutter blade on the Print Platen to
align the edge of the sheet. If you follow this advice, you will prevent the
cutter from cutting a section of the Calibration Pattern, which could cause
the Calibration to FAIL.
22 The Front Panel prompts you to select the paper category you used for the
calibration. Select the same paper that you used to perform the Paper
Advance Calibration print.
Use the
Arrow
keys to scroll to your paper
category and press the
OK
key to continue the media load process.
23 The Front Panel prompts you to select the specific type of paper you used for
the calibration. Use the Arrow keys to scroll through the menu and the OK
key to select your paper type.
Vista de pagina 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 489 490

Comentarios a estos manuales

Sin comentarios