HP SP400 Guía de usuario descargar pdf (Pagina 37)

Maintain the All-in-One

Clean the wrist case and hand mount

Use a baby wipe or a cotton cloth dampened with deionized water to scrub all areas of the

hand mount, straps, and wrist case that have come into direct contact with the skin.

Clean the door

To clean the opening in the door, do the following:

IMPORTANT: Do not touch the metal contacts or the ink nozzles.

1. Remove the print cartridge from the door.

2. Use a dry cotton cloth to remove the ink-soaked fibers from the opening in the door.

3. If the ink is too dry to easily remove the fibers, use a cotton swab dampened with deionized

water to break down the ink buildup.

Charge the battery

To charge batteries, follow the instructions that came with your battery charger.

Remove the All-in-One from hand mount

accessory

1. Squeeze both of the release buttons on the back of the hand mount.

2. Slide the hand mount backward, off of the All-in-One.

Release button

(one on each side)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 65 66

Sin comentarios

HP SP400 Guía de usuario Pagina 37