HP SP400 Guía de usuario Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 66
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
Troubleshoot Problems and Get Support
47
Figure 9-5 Problems printing correctly
Problem Cause Solution
The ink is not dry.
Allow more time for the ink to dry.
Try to avoid printing on surfaces that take longer to
dry, such as plastic sleeves, tape, etc.
Increase air flow in the area.
Make sure the printed surface is dry.
Increase the temperature in the area.
Lower the humidity of the area.
Change to Fast Dry template.
The print smears after
printing.
The ink is not dry due to stacking or
contact with other objects.
Allow the ink to dry before placing printed materials on top
of or next to each other.
Print rubs off The printing was done on a non-
porous material.
Allow the ink to dry before placing the printed area in
contact with other objects.
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Comentarios a estos manuales

Sin comentarios