HP Modular Smart Array 500 Starter Kit Guía de usuario Pagina 135

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 134
HP StorageWorks 2300 Modular Smart Array CLI reference guide 135
show host-parameters
Description Shows information about host ports on both controllers.
Syntax
show host-parameters
Output Port
Host port number
Media
FC(L): Fibre Channel-Arbitrated Loop
FC(P): Fibre Channel Point-to-Point
Target ID
Enclosure WWN or serial number
Status
Whether the port is operational (Up) or not (Down)
Speed (A)
FC only. Actual link speed in Gbit/sec. Blank if not applicable.
Speed (C)
FC only. Configured link speed in Gbit/sec. Blank if not applicable.
Topo (C)
FC only. Configured topology
PID
FC only. Primary ID. Blank if not applicable.
SID
FC only. Secondary ID. Blank if not applicable.
Example Show host parameters for a system with one FC controller:
# show host-parameters
Port Media Target ID Status Speed(A) Speed(C) Topo(C) PID SID
--------------------------------------------------------------------------
A1 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0
A2 FC(L) 217000C0FF000015 OK 2Gb Auto Loop 1
A3 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0
A4 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0
--------------------------------------------------------------------------
See also set host-parameters
Vista de pagina 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 185 186

Comentarios a estos manuales

Sin comentarios